
New EPAL pallets from €16.20, euro skids from €4.20, pallet collars from €10.20; custom sizes on request on +359 877 166 555 or via Viber/WhatsApp.
We reply to every inquiry with a price within 15 minutes.
Wooden packaging for export outside the EU must be heat-treated and marked in line with ISPM 15: IPPC, BG, the producer’s number and HT. This applies to pallets, skids and any wooden dunnage. G-PAL works with producers certified under Standard 15 and makes pallets and skids to order.
Updated: 12 October 2026 · G-PAL (Dzhipal Ltd), Plovdiv
When goods need to cross a border without delay, wooden packaging is not just a carrier. It is part of the paperwork, part of the inspection and often part of the reason a shipment either clears quickly or is held for checks. That is exactly why certified wooden packaging is sought not only by exporters, but also by manufacturers, traders and logistics companies that cannot afford unnecessary risk.
For companies that ship regularly, this is no mere formality. If you use pallets, skids, crates or other wooden packaging material for international deliveries, you need to be sure that the packaging meets the treatment and marking requirements. Otherwise, the money saved at the outset can turn into a real cost further down the chain.
What choosing certified wooden packaging means
The term usually refers to wooden packaging produced and treated in accordance with the International Standard for Phytosanitary Measures ISPM 15, known in Bulgaria as Standard 15. This involves heat treatment of the timber and mandatory marking showing that the packaging has been prepared for international movement.
In practice, this means the pallet or wooden skid has not simply been assembled to the right size. It has been produced under a controlled process, with traceability and a clear mark that the timber has been treated as required. For the customer, this brings a very tangible benefit – a lower likelihood of problems at border checks, during customs procedures and when the goods are received by the partner.
There is an important nuance here, too. Not every domestic delivery requires certified wooden packaging. But when you are exporting, particularly to markets with stricter controls, the decision should not be improvised. It is far better to choose the right packaging when planning the load than to look for a solution at the last minute.
When certified wooden packaging is mandatory
The need most often arises with international transport of goods exported on wooden pallets, in wooden crates or on non-standard wooden structures. This applies to machinery, parts, industrial equipment, building materials, packaged goods and many other loads.
If your company only ships products within the country, you may be able to use solutions where certification is not the main criterion. But if some of your loads are going abroad, there is no point mixing processes without clear control. In practice, this creates risk in the warehouse – some pallets are suitable for export, others are not, and mistakes are easily made during loading.
That is precisely why many companies keep a separate flow for export packaging. Procurement becomes clearer, warehouse work is better organised and the logistics team does not waste time checking every single unit at the last minute.
Why the certificate alone is not enough
On paper, it all looks simple – there is a mark, so the pallet will do. In practice, however, there are a few more questions. The first is whether the packaging is suitable for the load itself. The second is whether the size and construction suit the way the goods are stored, stacked and transported. The third is whether the quantities can be supplied on time.
Certified wooden packaging must not only meet the standard, but also perform in real-world conditions – loading bays, warehouses, forklifts, trucks, containers, transhipments. If the packaging is weak, unsuited to the weight or awkward to handle, having a certificate does not solve the operational problem.
So when choosing, it makes sense to look at three things at once – compliance with the standard, strength appropriate to the load and reliability of supply. It is the combination of these factors that makes a solution work.
The most commonly used solutions
The best-known option is pallets – standard or non-standard, new or used, depending on the application. For some companies, this is entirely sufficient, especially if the product is well packaged and can be transported stably on a pallet base.
For more specific loads, wooden skids, bracing elements or bespoke structures are used. This is a common solution for machinery, odd-sized components, fragile items or loads with uneven weight distribution. There, the task is not only to comply with the standard, but for the goods to arrive without deformation or damage.
There are cases where the cheaper solution ends up costing more. For example, if the load is heavy and the pallet has been chosen by size alone, damage can occur when lifting or moving it. On the other hand, light and regular loads do not always call for the most expensive build. Good practice is to match the packaging to the actual load rather than to a general rule.
Certified wooden packaging and warehouse control
One of the most underestimated issues is internal organisation. If you receive, stack and dispatch large volumes, you need to know which packaging is for the domestic market and which is for export. It sounds basic, but in a busy warehouse it leads to frequent mistakes.
When you have a regular supplier and a clear specification, the process becomes more predictable. You order the exact type of pallets or skids, you know what you are getting and you reduce the risk of mixing different classes of packaging. This is especially important for companies that serve several destinations and work to tight loading deadlines.
In such cases, it is not enough to buy whatever happens to be available. It is more useful to work to a set standard – size, load capacity, type of timber, treatment and marking. That way, packaging becomes part of the system rather than a stopgap.
How to assess a supplier
With certified wooden packaging, price matters, but it is not the only criterion. If the supplier cannot guarantee consistent availability, a quick response and uniform quality, a low price loses its relevance – especially when it comes to regular shipments.
A good indicator is whether you can get a specific answer to specific questions. For example, which type of packaging suits a given load, how quickly it can be delivered, whether non-standard sizes are possible and how quality is maintained on larger quantities. If the other side has clarity and experience, it shows quickly.
It also matters whether the supplier understands the logistics context. For a manufacturing company, simply buying pallets is not enough. They need to arrive on time, in the required volume and in a condition that allows immediate use. On a busy schedule, any deviation puts pressure on the entire chain.
New, used or non-standard solutions
There is no one-size-fits-all answer here. For exports and sensitive loads, new certified packaging is often the safest choice. It offers predictability in terms of size, strength and appearance, which matters for customers with stricter requirements.
Used options can be a sensible solution if they are in good technical condition and suitable for the specific application. They are often more economical and do an excellent job for certain loads. But control needs to be stricter here. Not every used unit is suitable for every delivery.
Non-standard solutions are particularly useful when the load allows no compromise. For machinery, oversized components or non-standard products, it is often more sensible to make dedicated packaging than to try to adapt to a standard pallet. This saves damage, additional bracing and time lost during loading.
What a business gains from the right choice
The biggest benefit is predictability. When you know the packaging is right, the risk along the chain falls. You feel it in the warehouse, in transport and at the customer’s end. Fewer disputes, fewer delays, fewer unexpected costs.
There is a purely commercial effect, too. Companies that deliver in an orderly way and without deviations are seen as more reliable partners. In a B2B environment, that is no small detail. Often it is operational discipline that makes the difference between a one-off order and a long-term customer.
For companies in Plovdiv, Sofia and across the country that ship on a regular basis, the most practical approach is clear – to have a supplier that can provide certified wooden packaging without delay, in the exact format and in the required quantities. GPAL is exactly that kind of partner – with real stock, experience in standard and non-standard solutions and a focus on fast service for businesses.
If you ship regularly, do not treat packaging as the final step before dispatch. It is part of the security of the delivery. And when that part is handled properly, the whole logistics operation runs more smoothly.
Frequently asked questions
Which packaging must comply with ISPM 15?
All solid wood packaging: pallets, skids, dunnage and collars.
Does it apply to plywood?
No, processed materials such as plywood and OSB are not subject to ISPM 15.
How much does it cost?
The price is set for the day – +359 877 166 555.
Guide prices from our price list: new EPAL from €16.20, used EPAL light grade from €11.00, medium grade from €10.00, dark grade from €7.00, euro skid 120×80 from €4.20. The exact price for the day depends on the grade and quantity – we will give it to you straight away on +359 877 166 555. A 1200×800 pallet collar is from €10.20.
See also: export pallets, Standard 15, wooden packaging.
📞 Call: +359 877 166 555 · Viber · WhatsApp
See also: which pallets you need for export, new euro pallets, today’s pallet prices.
Updated: 11 November 2026
About the author
depal
Pavel Damyanov is the manager of DZHIPAL Ltd (G-PAL) - a manufacturer and supplier of euro pallets, wooden skids and pallet collars based in Plovdiv, 270 Vasil Levski Blvd. The company is a licensed EPAL pallet repair operator (licence No. BG-308), buys back pallets and skids on site and delivers nationwide with its own transport.
Published on 3 May 2026
Need today's price? Tell us the pallet type, quantity and city and we will reply with today's price.
Request a price